Got a pile of spare laptop drives and no good way to mount them? This bracket lets you stack up to six 2.5" hard drives into a clean, compact tower, perfect for a DIY NAS, home server, or any storage build where space and tidiness matter.

Designed to be simple, sturdy, and easy to assemble. The drives slide into the rails and are secured with standard screws, keeping everything firmly in place even when tucked inside a case.

Why you'll love it:

• Fits 6x 2.5" HDDs or SSDs
• Clean stacked layout saves space
• Easy screw assembly — no supports needed
• Great for Raspberry Pi NAS, old PC repurposing, or homelab builds
• Prints in one piece per rail — minimal parts, maximum simplicity

Whether you're building a budget NAS from old laptop drives or just want to organize your storage setup, this gives your drives a solid home.

There is a place for a M4 thread insert at the bottom, so you can add stuff to this, maybe add some feet or a way to attach it to your case.

Obviously you need to print 4 to support your HDD or SSD

More sizes in the Print Profiles

Need a 3,5 inch version: [https://makerworld.com/en/models/2684921-hdd-stack-rack-3-5-drive-bracket](https://makerworld.com/en/models/2684921-hdd-stack-rack-3-5-drive-bracket)