This is a simple 3D printed 20 cm squeegee designed for screen printing.

It does not match the quality of a rubber squeegee, but it works well for simple and quick applications.

The model can be printed in PLA, but be careful when using solvent-based inks, as some solvents may damage or dissolve PLA.

The edge may deform if it is bumped or damaged, which can affect print quality.
If this happens, you can restore it by gently heating the edge (e.g. with a heat gun) and pressing it flat against a smooth surface using a ruler.

Ink may get trapped between the layer lines, so be sure to wash it thoroughly after use.

This squeegee was designed for use with my project:
"3D Printed Screen Printing Stencil - MeshFuse Screen"

Feel free to check it out if you're interested.