Precision-Fit "SALT" Kitchen Container

This high-quality, two-piece storage solution is designed for accuracy and ease of printing. It features a debossed (recessed) "SALT" label on the lid and a custom-fit interlocking ridge to keep the lid centered and secure.

Technical Specifications

• Total Dimensions: 40 mm x 40 mm x 45 mm (when assembled).
• Base Height: 30 mm (Volume: 14,265.3 cubic mm).
• Lid Height: 15 mm (Volume: 7,455.56 cubic mm).
• Model Details: The design includes 524 triangles for the base and 1,208 for the lid, ensuring smooth rounded corners and a precise friction-fit seal.

Universal Print Recommendations

These settings are optimized for the Bambu Lab P1S but will work on almost any FDM (filament) printer:

• Layer Height: 0.20 mm provides the best balance of speed and detail for the engraved text.
• Wall Count: 2 to 3 walls (shells) for a sturdy structure.
• Infill: 5% to 15% (Grid or Gyroid patterns recommended).
• Material: PLA is ideal for rigidity. Note: If using for food, please use a food-safe sealant or liner, as 3D prints have tiny gaps where bacteria can grow.
• Supports: None required. The design uses smart angles that any modern printer can bridge easily.
• Adhesion: Use a Textured PEI Plate or a standard brim if you experience corner lifting on your printer.

Filament & Time Data

• Material Weight: Approximately 19.94 g (about 6.58 m of 1.75 mm filament).
• Print Time: 35 to 50 minutes depending on your printer’s speed and acceleration settings.

Pro Tip: If the lid feels too tight or too loose due to your printer's calibration, adjust the "XY Size Compensation" or "Horizontal Expansion" by plus or minus 0.1 mm in your slicer.