spiderman clock

Spider man clock

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2mm

    #000000 PLA Sunlu + 2.0 Black Transmission Distance: 0.1
    #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8
    #ffffff PLA Sunlu + 2.0 White Transmission Distance: 6.8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Red
    At layer #16 (1.36mm) swap to White for the rest.

For clock hands you can use the MH011 kit or purchase from amazon for a set of parts [https://amzn.to/41t5wa4](https://amzn.to/41t5wa4)

Descrição