Project: Loki 200x200.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm

    PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #16 (1.36mm) swap to Blue Gray
    At layer #20 (1.68mm) swap to Ash Gray
    At layer #23 (1.92mm) swap to Ivory White for the rest.