A fully parametric fork-mount bracket for relocating or mounting indicators on your motorcycle. Designed as a two-piece split clamp that bolts together around the fork leg.

Customisable Parameters

Two settings you can adjust to fit your specific bike:

• Fork leg diameter: set this to the diameter of your fork tubes where you plan on mounting the indicator (default 53mm)
• Indicator mounting bolt size: Set this to match your indicator's mounting bolt (My indicators had an M10 threaded section for mounting so thats the default)

The indicator acts as one of the clamping bolts and there is a hole for an m6 bolt on the other side.

I recommend printing in TPU for AMS as its stiff enough to function as a clamp but also soft enough to grip onto the fork leg and not slip. If you dont have TPU then either PETG or ASA/ABS but you may need to place a strip of rubber under the mount to give it the grip needed to not slip down the fork (A piece of inner tube would work great)