提供了四款线夹模型，适用于3030欧标铝型材（2.0壁厚），解决线束杂乱问题。

Four wire clip models are provided, which are suitable for 3030 European standard aluminum profiles (with a wall thickness of 2.0), solving the problem of messy wire harnesses.

除此之外，也可用作挂钩使用；

In addition, it can also be used as a hook.

按压式：安装时先将线束收入孔内，按压线夹两侧放入槽内后松手即可，取出时同理；

Press - type: When installing, first put the wire harness into the hole, press the wire clip into the slot and then release your hand. The same principle applies when taking it out.

插入式：安装时先将线束收入孔内，将卡爪侧对准卡槽，按压线夹即可插入铝型材卡槽，取出时需挤压两侧取出；

Insert - type: When installing, first put the wire harness into the hole, align the claw - side with the slot, and press the wire clip to insert it into the aluminum profile slot. When taking it out, squeeze both sides to remove it.

四款模型适用8mm线径以下线束（线径略大时勉强可挤入）；

The four models are suitable for wire harnesses with a wire diameter of less than 8mm (when the wire diameter is slightly larger, it can be barely squeezed in).

不同厚度铝型材可适当缩放模型进行适配，欢迎各位大佬上传打印参数配置，谢谢~~~

For aluminum profiles of different thicknesses, the models can be appropriately scaled for adaptation. I welcome all experts to upload the printing parameter configurations，thanks~~~~