A two-piece 3D-printed button guard designed to protect the controls on a lifter/crane pendant remote. Prevents accidental button presses and protects buttons from impacts in industrial environments. Tested in real working conditions.

What's included:

• ClampBand — main bracket that wraps around the controller housing (95 × 87.5 × 30 mm)
• ButtonWing — shield piece that covers the buttons (55 × 15 × 30 mm)
• Assembly requires 1× M5 or M6 bolt + nut

Recommended print settings:

• Material: PETG or ASA (for industrial/outdoor use; PLA ok for indoor)
• Layer height: 0.2 mm
• Infill: 40–60% (needs to be sturdy)
• Walls: 3–4 perimeters
• Supports: not required
• Estimated filament: ~75 g total
• Print time: ~4–5 h (both parts)

Notes:

• Designed for a specific pendant controller — measure yours before printing and adjust scale if needed
• The clamp friction-fits around the housing; the wing attaches with a bolt through the mounting hole
• Printed and tested in a real industrial environment