Customizable Multi pattern Tissue Box

🧻 Parametric Tissue Box Holder – Custom & Decorative

This project started from a simple need:
👉 A tissue box holder that fits all box sizes while looking clean and decorative.

After enjoying previous parametric designs, this felt like the perfect project to push things further.

📸 I’d love to see your prints — feel free to share your photos!

⚠️ This model is parametric — you can customize its dimensions and other details using the “Customize” button.

🎨 Available Designs

Currently available:

Pattern 1 : Kumiko vertical

Pattern 2 : Simple grid
Pattern 3 : Kumiko diagonal

Pattern 4 : Seikaiha

📦 Bonus:
A profile called "Only Decoration" includes all patterns I publish.

⚡ Quick Start

To generate your model quickly:

Customize the model parameters
Export as .m3f
Open in Bambu Studio
Right-click → Split → To Objects
Arrange parts by color on plates

⚠️ Assembly Tip

1 - The rails designed to attach the decorative patterns are not sufficient on their own to securely hold them in place. You will need to apply a small amount of glue to ensure proper fixation.

⚠️ Be careful with the quantity to prevent glue from overflowing when assembling the parts.

2 - If "Is side decorated" is enabled:

Side panels are always generated
👉 Simply don’t print them if you don’t need them

✨ Key Features

Fully parametric → fits any tissue box
Adjustable opening size
Optional decorative panels (top & sides)
Clean and modern design

⚙️ Recommended Print Settings

Wall count: 3
Infill: Gyroid

📦 Ready-to-use profiles included for common sizes

⚙️ Parameters Explained

📦 Box Dimensions

Width / Length / Height
👉 Match your tissue box size

💡 Tip:
Increase height by + 5 to 20 mm to improve pattern alignment

🔲 Opening Size

Width / Length
👉 Controls tissue dispensing comfort

🎨 Side Decorations – is_side_decorated

1 → slots + panels generated
0 → panels generated, no slots

🧷 Top Decorations – is_top_decorated

Enable / disable top pattern

🔧 Fit Tolerance

Closer to 0 = tighter fit

Updates :

🚀 21/04/2026 - V2 - UPDATE – Major Improvement: Clip System (No Glue Needed!)

I’ve introduced a brand new way to attach the decorative panels — no more glue required!

I will keep the V1 models available for a while, in case some of you are still working on existing projects.
After this transition period, I plan to remove the V1 models.

Since gluing the decorations could be tricky and often messy, I designed a clip system to securely hold each panel in place.
Each decorative piece now features a small 2mm edge on both sides, designed to snap directly into the box.

To install them, simply apply a slight twist to the panel until you find the right angle — and that’s it!

⚠️ Important notes:

V1 elements are not compatible with V2 (and vice versa)
This update introduces a small limitation:
the minimum width or length of the tissue box is now 10 cm
(below that, bending the panel becomes difficult without risking damage)

That said, it’s unlikely most tissue boxes are smaller than 10 cm anyway :)

The installation may require a bit of force for a 10 cm edge.
If your model is larger, it should be easier to handle.

This is the most stable solution I’ve found so far to secure the panels.
If you have other ideas that are just as solid but easier to use, I’d love to hear them!

I hope you’ll enjoy this improvement and that removing the need for glue will make it easier for more people to try it out!

✅ Available directly in the Customizer

🚀 14/04/2026 - UPDATE – New Pattern Available: “Seikaiha”

I’ve added a brand new pattern, Seikaiha, which has quickly become my favorite.
The result looks great both up close and from a distance — I really love how it turned out!

I’ve also refined the existing patterns to make them easier to distinguish from a distance:

Lines are now thinner
Previously tight areas have been slightly opened up for better clarity

I hope you’ll enjoy it as much as I do :)

✅ Available directly in the Customizer
✅ Included for the 2 tissue box sizes in the print profiles

Descrição