It's important to follow the necessary inputs in order to print this model; otherwise, errors may occur during printing.

These settings are designed for Bambu Studio and PrusaSlicer. While they can work with other slicers, we recommend using these two to avoid potential issues.

===== Settings =====

With a 0.8mm nozzle:
• Don’t rotate the model.
• Set the Layer Height to 0.6 mm.
• Activate Spiral Mode (vase mode).
• Disable slow down for overhangs.
• Set 4 Bottom Layers.
• Use External Perimeters/Outer Wall at 1.2 mm.

With a 0.4mm nozzle:
• Don’t rotate the model.
• Set the Layer Height to 0.2 mm.
• Activate Spiral Mode (vase mode).
• Disable slow down for overhangs.
• Set 12 Bottom Layers.
• Use External Perimeters/Outer Wall at 1 mm.

===== Observations =====

• Ignore "non-manifold edge" error.

===== How to install =====
• You need an E27 screw socket with two nuts/rings to assemble the lamps.