Compact enclosure for the ESP32-C6 with 1.47" Waveshare LCD

The case fits snugly around the board and display, providing solid protection while keeping all essential areas accessible. Side buttons and the back remain fully open, and mounting points are not obstructed.
The enclosure is a single-piece design and is secured with snap hooks – no screws required.
Perfect for standalone use or easy integration into other projects.

Two versions are included:
• Solid version (no RGB windows)
• RGB window version – designed for printing with transparent PLA for lighting effects

🎬 Includes a full assembly  video below – scroll down to see how it works

Assembly Instructions

1. Insert the ESP32 at an angle into the case, starting from the side with the USB-C cutout.
2. Gently push the board further into the case in the indicated direction.
3. On the opposite side, use your thumb through the display opening to slightly flex the case outward so the clips can slide over the display.
4. Continue pressing the case and carefully push the ESP32 down from the top until the clips snap securely over the PCB.

⚠️ Important: Do not apply pressure to the display.

Check out my other models here:

[https://makerworld.com/de/@Titan_K7](https://makerworld.com/de/@Titan_K7)