Created this simple mount in Bambu Studio to be able to mount my Bird Buddy on to our deck post. I used 12 walls and 25% infill and printed in PETG HF to make it strong and its working great so far. Make edits to print settings as you see fit. I used the yellow screw anchors that came with the amazon bracket, with using a little force, the anchors should fit the two bottom holes. For the top two holes, I used a  #12-24 x2 inch screws with nuts. The one from Homedepot came with 2 screws and 2 nuts. I recommend adding washers. 

I utilized the following items. 

Bracket:

[https://www.amazon.com/dp/B0GH263H4Y?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.com/dp/B0GH263H4Y?ref=ppx_yo2ov_dt_b_fed_asin_title)

Top screws:

[https://www.homedepot.com/p/Everbilt-12-24-x-2-in-Phillips-Flat-Head-Zinc-Plated-Machine-Screw-2-Pack-830991/317479747](https://www.homedepot.com/p/Everbilt-12-24-x-2-in-Phillips-Flat-Head-Zinc-Plated-Machine-Screw-2-Pack-830991/317479747)