Blue Tinted Transparent Pattern Vase

This vase is all about that clean, glass-like look ✨
The flowing shape and subtle pattern really shine when printed in transparent filament, giving it an ice-like finish.

Filament used Devil Design PETG 1,75mm 1kg - Super Blue Transparent (Botland)

Good alternative: any PETG Translucent from Bambu or other company

Print Setup

• Designed for a 0.8 mm nozzle
• Tested on BambuLab Cool Plate SuperTack
• Final height: 180 mm

You can use other nozzles or plates, but:

• It will likely take longer
• The transparency may not be as clean

This is a long, slow print on purpose — it helps avoid bubbles, warping and that cloudy/milky look

👉 For the best result: stick to the provided settings

Filament Tips (Very Important)

To get that crystal-clear effect:

• Use transparent PETG (PLA/PVB also work)
• Print at the highest safe temperature for your filament
• Dry your filament first
  • I used: 65°C for 6 hours in SUNLU S2 Filament Dryer (Amazon)

Because the print takes a long time, the filament can absorb moisture during printing.
If possible, print from a dry box or enclosed setup to keep it consistent. 

Moist filament = bubbles = less transparency.

Want a Simpler Print?

If you’re not going for transparency:

• Just use your normal slicer settings
• Works great with any material - a STEP file is included

Take your time with this one — it’s worth it.