Soyuz-5

A model of the Soyuz-5 launch vehicle with a 5.2 m diameter head fairing on a scale of 1:159.

It consists of 8 parts.

The height of the finished model is 430 mm (with stand).

You can scale the model. If you reduce the size, there is a risk that some small elements will not be printed. However, I tried printing this model 30% smaller and the result was just as good.
The print profile was adjusted for a 0.2 mm nozzle with eSUN PLA filament. You may need to change some parameters for yourself.
The finished parts must be glued together. Some parts will probably hold up well without it, but I still recommend putting them on glue.
The grid is located on a separate work surface because I recommend removing it from the printer immediately after printing to make it easier to give it the desired shape.