Project: MGS.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 83.76x112.07mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

 PLA  Black Transmission Distance: 0.3

 PLA  Gray Transmission Distance: 1.5

PLA  White Transmission Distance: 5

PLA Red Transmission Distance: 4

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Ash Gray

At layer #15 (1.28mm) swap to Jade White

At layer #22 (1.84mm) swap to Red for the rest.