This is Mob (Shigeo Kageyama) from mob psycho 100.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #482960 PLA BambuLab Basic Indigo Purple  Transmission Distance: 1.1
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Indigo Purple
    At layer #19 (1.6mm) swap to White for the rest.
 

Those are just the filaments i had on hand. use whatever you want.

You can replace the purple with just about any color and it should still look good.

To scale it, change the x and y dimensions, do not change the z dimension.