I wanted to create a functional print for the Bonsai Design Contest and this is what I came up with!

The container measure about 5in wide and 2.5in without lid. I have included two lid options - one with the bonsai and one that is plain. The entire project prints support free and without the need for an AMS. The only time the AMS is used in the AMS Version profiles is to automatically swap the color for the base twice, but that is the only time it is necessary (and the No AMS profiles have pauses where those two manual swaps are needed).

This project will fit on the A1 Mini and I have provided profiles with the parts placed appropriately.
 

Assembly Instructions:
- Assemble each of the halves together for the tree trunk and foliage as well as the feet on the container using the provided pegs. (I used Super Glue Gel to assemble mine.)

- After assembling the halves and putting the feet onto the container, the tree, water, and rocks all glue into place onto the base in the corresponding cutouts.

- Then the assembled lid fits into the opening on the base.

Filaments used are BambuLab Matte PLA Sakura Pink, Ice Blue, Ash Gray, Caramel, and Grass Green along with BambuLab Basic PLA Mistletoe Green.

Thanks for looking, if you like the look of this project and want to see more of what I have to offer, check out my profile or some of my favorite projects below: