Hey All,

Here is Easter Sign #2. I used 4 colors in my example for this one, but the colors can all be easily changed in Bambu studio by each individual part under objects, so you can customize colors as needed (no painting needed). 

Ironing is turned on for an extra smooth top look.

This sign can also be scaled to fit different size printers as needed.

Here are the different plate types in each profile:

Free Standing (like in the main image) (stand optional) -  thick enough to stand on its own, but still thin enough to use a stand for extra support so it doesn't fall over.

Thin - sign is cut nearly to half thickness, so it is still pretty sturdy but cannot stand on its own and would need a stand of some sort (I have the one I used linked below). This one shaves off a little filament and time from the print. You could also lean it against something.

Extra Thin - Up to half the thickness of the thin version, this one uses even less filament and time, and is also good for hanging on the wall or somewhere with double sided tape or command strips, etc. 

If you are interested in a stand that can be used for both the thin and free standing versions (as seen used in my other signs) there is a great one here (this one may need two stands since it has legs):  Made by maker Kopp3D (I usually use the medium version): [https://makerworld.com/en/models/479988-simple-display-stand-parametric-fully-customizable#profileId-405824](https://makerworld.com/en/models/479988-simple-display-stand-parametric-fully-customizable#profileId-405824)

Materials and filaments used will be attached.