Want to save some space on your table but keep the tissues within easy reach?

The easy solution - mount it to the underside of your table with a simple, yet stylish box holder.

And keep it stylish, we don't need a big plastic box with full walls and waste filament, so add in a great pattern and we get the best of both worlds. Why Hexagons? Because Hexagons are the Bestagons of course. Maximum wall structure, minimal material needed.

The tissue box holder can be mounted either with double sided sticky tape like command strips, or using screws for a more permanent mounting.

Screw holes are designed for M2.9/M3 or #4 Philips rounded pan head screws, pick the length as appropriate for your table, e.g. a #4x3/8in round head tapping screw, or M2.9-9.5mm pan head tapping screw would suffice for most applications.

The print is support free for simple printing. It will hold the tissue box by itself through some fiction.

The optional back stop to prevent the tissue box from accidentally falling out the back if pushed.

Print Settings

• Supports: No
• Layer Height: 0.20mm
• Infill: 15%
• Walls: 2
• Print orientation: 
  • Flat on the print bed for tissue box
  • Flat on the print bed for the backstop with the angled pieces pointing upwards
• Material: PLA. For extra appearance, a silk color filament can give it the finishing touch

Installation/Assembly

• Mount the tissue box with the top side (note the screw holes to find it) under your table using either:
  • 4x Double sided sticky tape or command strips along the edges where the screw holes are
  • 4x Screws - holes are designed for 
    • M2.9/M3, e.g. M2.9-8mm (sometimes marketed as M3-8mm) pan self-tapping wood/sheet metal screw, 
    • or if pre-drilling the hole into the mounting surface, a blunt head self-tapping screw like BT3-8mm can also be used.
    • or if using imperial measurements, #4 screws, e.g. #4x3/8in round head tapping screw.
• Insert square tissue box/kleenex box with the dispensing hole lined up with the dispensing cutout of the box holder
• Optional: Insert the backstop behind the box so it can't slide out by accident (thought the fit is by itself fairly stable)

Alternative use as tabletop tissue box

• The box also has small feet on the back, which allow the box to be used as decorative tabletop tissue box.
• The backstop is recommended in this case, so the tissue box itself has less chance of falling out out if someone picks it up.