Print your own Climbot : a cute, silent robot companion from CAIRN - the climbing game from The Game Bakers

I fell in love with that cute guy and needed to print him to have him beside me. This print was optimized for assembling with resistant and easy-fitting parts. I strongly advise using super-glue !

You can place things into the head of the bot, such as junk, chalk or fresh pittons. I have placed 2mmx5mm round magnets on the head and the lid so the lid would stay in place if you want to let that compartment open.

The Climbot can be mounted onto a wall : I placed a negative keyhole into the basis, that allows you to mount it. I recommend thinking on how you want the climbot to be oriented, how you want the legs to be placed then rotate that negative keyhole accordingly. 

If you decide to mount it, you may want to glue the lid onto the head as the magnets would not be strong enough and may fall (worse if you decide to add a rope). 

In order for the legs to properly touch the ground, you may need to cut a bit of material on the upper angle of the leg end with a cutting tool (please be safe) ang glue them.

You would need to assemble the legs and the wheels, then assemble the legs with the base gear by angling them as you want (adjust the wheels rotation as they will provide stability).

You can place a rope : I printed a carabiner from Makerworld, but I guess you could use a real one. Place it then into the slot on the arm - the rope I used is a 6mm one. You could probably use a thinner one if you resize the bot. 

If you successfully print one, please share a picture with the community ! :-)

If you haven't played Cairn yet, the game is available on several platforms : [https://www.thegamebakers.com/cairn/](https://www.thegamebakers.com/cairn/)
Give it a try and support the developpers by buying their game :-)