Mount your official Raspberry Pi 7” touchscreen directly into a 10” mini rack — flush, clean, and out of the way.
Designed specifically for the official 7” Raspberry Pi display paired with a Pi 4 or Pi 5.

No brackets. No adapters. Just drop it in and rack it.

What’s Included

• 3MF file with embedded PETG print profile (ready to slice)
• STL file for universal slicer compatibility

Required Hardware

• 4× M3 screws (for rack mounting)
• Official Raspberry Pi 7” Touchscreen Display
• Raspberry Pi 4 or Raspberry Pi 5

Recommended Print Settings

• Material: PETG (recommended) or PLA
• Layer Height: 0.24mm
• Infill: 8% Gyroid
• Supports: Required
  • Tree supports
  • Auto
  • Slim
  • 35° overhang threshold

⚠️ Pro Tip: Dry your filament before printing.
PETG absorbs moisture quickly — and wet filament leads to stringing, poor surface finish, and weak layer adhesion.
Dry at 65°C for 4–6 hours for best results.