This was my fist Hueforge not the best work and also the model is thin wait for it to cool down before taking off build plate.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160.95x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2339mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Jade White
    At layer #15 (1.28mm) swap to Black
    At layer #16 (1.36mm) swap to Red

Setting

Layer height: 0.08

Initial Layer height: 0.16

Wall: 2

Sparse infill density: 100%

Sparse infill pattern: Rectilinear

Turn Off Prime Tower