Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA E-PLA add:north red Transmission Distance: 5
PLA E-PLA add:north Yellow Transmission Distance: 6
PLA Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to red
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.