Please note there are 5 filaments, remember to configure and change your spools correctly with an AMS.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 126.61x225mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #0041cc PLA+ Sunlu Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5

This print uses 5 unique filaments

Other similar coloured filaments will work well.

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #10 (0.88mm) swap to Cyan
    At layer #16 (1.36mm) swap to Red

Border Only Colors from here until the end.
    At layer #20 (1.68mm) swap to Jade White for the rest.