Customizable Furniture Riser

Parametric Furniture Riser

A fully parametric furniture riser for beds, couches, and desks. Choose from rectangular, circular, or half-circle shapes, then dial in the top dimensions, base taper, wall lips, and height to fit your exact needs. All three shapes share a consistent tapered base that adds stability without bulk.

Using the MakerWorld Customizer

Click Configure on the model page to open the customizer panel. Adjust parameters in each section, then click Slice to generate your personalized riser ready for print.

Parameters

Common — applies to all shapes

Parameter	Description
shape	Rectangular, Circular, or Half Circle
base_extra	How much larger the base is than the top on each side (mm)
height	Total height of the riser (mm)
wall_thickness	Thickness of the lip walls (mm)
lip_height	How tall the lip stands above the top surface (mm)

Rectangular

Parameter	Description
top_width	Width of the top surface (mm)
top_depth	Depth of the top surface (mm)
edge_radius	Corner rounding radius (mm)
lip_front	Toggle the lip on the front edge
lip_back	Toggle the lip on the back edge
lip_left	Toggle the lip on the left edge
lip_right	Toggle the lip on the right edge

Circular

Parameter	Description
top_diameter	Diameter of the top surface (mm)
lip_cutout	Remove none, quarter, half, three quarters, or all of the lip ring

Half Circle

Parameter	Description
half_circ_diameter	Diameter of the curved end (mm)
half_circ_length	Length of the straight section from flat end to center of curve (mm)
half_lip_curved	Toggle the lip on the curved end
half_lip_flat	Toggle the lip on the flat end
half_lip_sides	Toggle the lips on both straight sides