gaia • trays

minimalist desk organiser trays for a contemporary desk setup, a hybrid of printing and laser cut cork inserts, in two different options, perfect companions to the gaia • pen organiser

dimensions in mm

• tray 1  ~ x • 190 · y • 80· z • 25
• tray 2  ~ x • 180 · y • 100 · z • 15

important

• filament should be dry and calibrated so that it deals appropriately with printing the surfaces
• build plate must be properly clean so that there aren't adhesions issues and lifts during the print
• laser cut model linked so that you can cut the required 2mm cork inserts • face plate and ‘foot’
• highly recommend using a few spread out drops of glue to fix the cork inserts to the print
• includes print profiles and stls for printing only, without the inserts, with bottom indents wher you can use 10mm rubber feet

photos show printed in pla matte and 2mm cork inserts

• .40mm nozzle
• .20 layer height
• 15% adaptive cubic infill
• no supports
• painted fuzzy skin

notes

• commercial licence membership available on my patreon
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• includes bambu studio 3mf files and STLs

follow me on instagram to stay updated on new releases • h3li0.design