Next up in my series for Multiboard ( [https://mutliboad.io](https://mutliboad.io)) I needed something to holds pens/pencils and small tools.   There are loads of bins out there, many that can hang off any of the choices, like Multiboard/HSW etc.   I didn't find any that were customized so I can size it to the tool, or it was for HSW, not Multiboard, etc.     So I decided to just reuse another design and beef it up to share here.     Also you can select your mount, Multiboard, HSW, Opengrid etc.   Put a tape measure anywhere.

So you can select a mount type from the following

• OpenGrid Lite ([https://makerworld.com/en/models/1175037-underware-for-opengrid?from=search#profileId-1195039](https://makerworld.com/en/models/1175037-underware-for-opengrid?from=search#profileId-1195039))
• OpenGrid Full
• Screws (#8 Flatheads).
• HSW Horizontal ([https://makerworld.com/en/models/22521-honeycomb-storage-wall?from=search#profileId-27457](https://makerworld.com/en/models/22521-honeycomb-storage-wall?from=search#profileId-27457))
• Multiboard SNAP ([https://www.multiboard.io](https://www.multiboard.io))
• Multiconnect - Multiboard ([https://makerworld.com/en/models/642696-multiconnect-generic-connector-for-multiboard?from=search](https://makerworld.com/en/models/642696-multiconnect-generic-connector-for-multiboard?from=search))
• Multiconnect - OpenGrid ([https://makerworld.com/en/models/1207512-opengrid-full-lite-multiconnect-multiboard-adapter?from=search](https://makerworld.com/en/models/1207512-opengrid-full-lite-multiconnect-multiboard-adapter?from=search))
• Pegboard Mount (need the thin Multiboard pegboard clicks [https://thangs.com/designer/Multiboard/3d-model/Pegboard%20Click%20-%20Lite%20Multipoint%20Rail%20%28Folded%29-1368649](https://thangs.com/designer/Multiboard/3d-model/Pegboard%20Click%20-%20Lite%20Multipoint%20Rail%20%28Folded%29-1368649))
• Skadis (need the thin connectors [https://makerworld.com/en/models/1068888-multipoint-x-skadis-hook#profileId-1058391](https://makerworld.com/en/models/1068888-multipoint-x-skadis-hook#profileId-1058391))

Also a thanx to BlackJackDuck ([https://www.printables.com/model/1002471-multiboard-snap-backer-generator-parametric/files](https://www.printables.com/model/1002471-multiboard-snap-backer-generator-parametric/files)), that provided the OpenSCAD for the Multiboard Snaps.

If I missed anyone please let me know and I will update the text.

The parameters are pretty simple.

• Mount Type - explained above.
• Inside Width - how wide should the bin be (mm).
• Inside Depth - how deep is it from front to back (mm).
• Wall Thickness - how thick to make the walls (this does to change back thickness for Multiconnect).   4mm is a pretty good size.   To thin and things break.
• Height - how high to make the bin, to small and some SNAP selections will create weird effects.
• Hex Size - change the size of the hex openings, be careful  here to large and it will require supports.
• Hex line size - what size to make the lines in the Hex Panel

If you have a chance check out some of my other projects  ([https://makerworld.com/en/collections/16603099-multiboard-hsw-opengrid](https://makerworld.com/en/collections/16603099-multiboard-hsw-opengrid))

Update 3/23/2026

• Fixed some issues with how the back panel was created, so mount types were off.   
• Also you can now adjust the corners to round them more or less.   Corner radius cannot be less than wall thickness.