I’m new to 3D modeling and still learning. If you find any problems or have ideas on how to improve the design, please let me know. Feedback is always welcome! 

This model was my early work so the model is Thick

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.54x200mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.26069mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #8d50bc PLA Copymaster 3D Perfect Purple  Transmission Distance: 3.1
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #32 (2.64mm) swap to Perfect Purple
    At layer #34 (2.8mm) swap to Jade White
    At layer #37 (3.04mm) swap to Perfect Purple for the rest.

Setting

Layer height: 0.08

Initial Layer height: 0.16

Wall: 2

Sparse infill density: 100%

Sparse infill pattern: Rectilinear

Turn Off Prime Tower