If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at [https://patreon.com/29flo](https://patreon.com/29flo) and subscribe to a membership tier that suits you. 
 

Print Difficulty level: [5/10]

[ My Print Settings for 15 cm figurine ]
Nozzle: 0.4mm
Layer Height: 0.15-0.2mm
Infill: 5-10%
Wall loops: 2-3
Supports: Tree (auto)
Printed with:  PLA Black

Printed with fuzzy skin effect:
- Fuzzy Skin: Contour
- Fuzzy Skin Point Distance: 0.2
- Fuzzy Skin thickness: 0.2
 

These photos are real and show an actual 3D-printed figure photographed by me.
 
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.