Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I wanted to create a lightbox, but something different - it became a football jersey.
First release will be MESSI 10, i made it in pink to look like Miami, but you can choose your own color.
I think the pink color to the lightbox looks very cool.
The front
The front of the jersey is 1mm thick, 0,6mm color and 0,4mm white, to make the colored filaments bind together, you can experiment with other colors for the binder, but white also serves as light diffuser.
The Back
The back is best if its white inside to diffuse the light, and with black walls to not let light out.
Follow the assembly guide for placing the LED strip.
Some truobleshooting from my experiences:
- Be sure to clean the bed - Very important to prevent failure ( i use hot water and soap).
- Clean the nozzle tip from filament before printing. I have seen filament drop in to the print when it slips of the nozzle.
- Its a good idea to keep an eye on the first layer so you can cancel the print if something looks wrong.
- The light has difficulty shining through matt colors and can not shine through very dark colors.
You can choose to use the Bambulab LED strip, that you can purchase on the site, or you can find one at your local store.
I ordered mine from Aliexpress.
Link to LED from Aliexpress that you can use, or something similar:
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta