Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A small, strong case with a collection of optional inserts for different uses.
Case
Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.
This can be a standalone case or you can add inserts for more functionality.
Print Settings
Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid.
Optional Inserts
- Battery Holders
- AA Holder - fits up to 6 AA batteries
- AAA Holder - holds up to 8 AAA batteries
- 9V Holder - fits up to 2 9V batteries
- Digital Storage Holders - Can be used together or separately
- MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
- SD Card Holder - fits up to 6 SD cards in the upper section
- Dividers
- Full Divider - Splits the entire case into 2 compartments
- Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
- Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
- Nozzle Holders - Can be used together or separately
- Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
- Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
Print Settings
No special print settings are needed for any of the inserts. I used 3 perimeters and 10% infill.
The following filaments were used in the pictures above:
Black Case
- polymaker PolyTerra Charcoal PLA
- Hatchbox Sparkle Gray PLA
Red Case
- polymaker PolyTerra Army Red PLA
- polymaker PolyTerra Lava Red PLA
Yellow Case
- PrintBed Yellow PLA
- polymaker PolyTerra Banana PLA
Teal Case
- polymaker PolyTerra Arctic Teal PLA
- PrintBed Baja Blue PLA
Purple Case
- Prusament Galaxy Purple PLA
- Fillamentum Lilac PLA
Orange Case
- CC3D Flame Orange PLA+
- Inland Orange PLA
Green Case
- PrintBed Green PLA
- polymaker PolyTerra Forest Green PLA
Blue Case
- GIANTARM Matte Navy Blue PLA
- polymaker PolyTerra Sapphire Blue PLA
Multi-Use Case with Inserts
Publicado em 27 de set de 2023