OOOOOOooooo who lives on your playmat and 3D printed is he?! 

Spongebox Deckpants!

A Spongebob Squarepants inspired MTG deck box ready for a full 100-count double sleeved commander deck! Perfect for those Secret Lair drops. ;)

Check it out on YouTube!

[https://youtube.com/shorts/gINLzcRLdsY?feature=share](https://youtube.com/shorts/gINLzcRLdsY?feature=share)

Materials Needed:

8x2mm magnets -  8x2 mm Magnets

Your Glue of choice. I prefer to use Stick Fast CA Thick adhesive with Mitreapel AC400 activator. 

     CA glue Stick Fast CA Adhesive

     Glue Activator Activator

Filament:

Bambu Lab PLA Basic Brown

Bambu Lab PLA Basic White

Bambu Lab PLA Basic Black

Bambu Lab PLA Basic Yellow

Bambu Lab PLA Basic Red

Printing Profiles:

This was printed on the X1C and H2D. AMS needed for the deck box and logo inserts

Assembly Instructions:

Everything is glued into place. Make sure your magnets are placed correctly! It's easy to accidentally flip one when gluing it into place in the opposite piece. To avoid mistakes, I typically glue all of the magnets into the deck box first. Then just put the opposing magnet on top of the magnets you just glued into place. Use something like a sharpie or other method of marking the top of the magnet so it's easy to identify which side needs to be place into the whole in the lid. Doing them one at a time avoids mistakes....so I've heard...because this has never happened to me....ever.... ;)

Support me with a boost!