→ Link to my collection of works ←

******************************************************************************************

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.6x250mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff4f05 PLA esun orange basic  Transmission Distance: 4.7
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffffff PLA BabmyLab Basic Jade White  Transmission Distance: 5.2
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #13 (1.12mm) swap to orange basic
    At layer #15 (1.28mm) swap to Blue Gray
    At layer #20 (1.68mm) swap to Jade White for the rest.

******************************************************************************************

For only One AMS, need 1 pauses during the printing,

Start with 4 colors as follows:
 

Slot1: Black
Slot2: Red
Slot3: orange
Slot4: Blue Gray

1st pause was set at Layer #18 in the print file to allow color swap:
 

Slot1: Black --> Jade White

******************************************************************************************