ThirdReality Motion Sensor Corner Wall Mount

A corner wall mount designed specifically for the ThirdReality Motion Sensor.
This bracket installs neatly into a 90° wall corner and positions the sensor at a slight downward angle to improve motion detection coverage across the room.

The angled design enables the sensor to monitor more of the room, rather than pointing straight outward or downward.

Key Features

• Designed specifically for the ThirdReality Motion Sensor
• Fits standard 90° wall corners
• Downward viewing angle (~15°) improves motion detection coverage
• Compact design that blends into the corner
• Rear corner relief ensures the mount sits flush against real drywall corners
• Smooth outer edges for a cleaner printed finish

Sensor Mounting

The mounting holes match the ThirdReality Motion Sensor screw spacing.

• Hole spacing: 29 mm center-to-center
• Hole diameter: 2.6 mm

This allows the sensor to mount directly to the bracket using small screws.

Wall Mounting

The bracket attaches to the wall using a single recessed screw inserted from the front of the mount.

Mounting screw specifications:

• Screw shaft clearance: 5.2 mm
• Maximum screw shaft depth: 15 mm
• Recessed screw head diameter: 10 mm

The screw head sits inside a recessed pocket so it remains hidden once the sensor is installed.

Rear Corner Relief

The back corner of the mount is slightly beveled so it fits properly into real wall corners.

This prevents interference from:

• drywall mud
• caulking
• slightly rounded inside corners

This helps the mount sit flat against both walls.

Designed For

ThirdReality Motion Sensor

Compatible with ThirdReality Zigbee Motion Sensor