Timmy Airshow 计划第五弹：空中女王波音747-8——标准版

  感谢各位MakerWorld的朋友们对我们模型的喜爱，在已经发布的系列空客模型的基础上，正式推出我们的第五组模型，也是首个波音客机模型——空中女王747-8i，模型提供标准版和探索版。此文件为标准版。
  考虑模型的尺寸和细节效果，标准版提供三个不同的比例：1:100、1:120、1:144，模型的成品尺寸见下表：

  应很多朋友的要求，我们为不同打印尺寸的机型提供了不同的打印文件，尽量实现一体打印。请根据自己的喜好选择相应的文件。底座的文件是通用的。

1、关键打印要求

磨刀不误砍柴工，为确保打印成功，请务必遵循以下关键打印要求：
（1）机身和机翼零件等高耸零件，请在打印时务必在热床涂胶（推荐:拓竹热床液体胶水），并根据所选耗材将热床温度提高适当提高。
（2）请选择使用层间结合力较好的耗材确保机翼（尤其是翼梢小翼）等零件的强度，推荐使用PLA Basic或PLA+等层间结合力更好的耗材（请勿使用PLA Lite等层间结合力较差的耗材），并在打印前将耗材烘干。

2、自定义涂装

本次发布的模型为不带涂装刻线的空白机身，方便大家制作自己喜爱的涂装。我们提供了完整的自制涂装教程和模板，请点击这里查看教程，模板可在下面的文档中下载。

——————————————

3、更新记录  Update Log：

• 2026.04.02更新：添加汉莎航空涂装版本的配置文件，需使用AMS打印，请在配置中下拉选择这个版本的文件打印。
• 2026.04.11更新：添加所有比例的涂装模板文件。
• Updated 2026.04.02: Added configuration files for the Lufthansa livery version. AMS printing is required. Please select this version from the dropdown menu in the configuration.
• Updated 2026.04.11: All livery templates are now available for download.

——————————————————————————————————

TIMMY AIRSHOW Project 5th Release: Queen of the Skies Boeing 747-8i – Standard Edition

Thank you to all our friends on MakerWorld for your love of our models. Building on our previously released Airbus series, we are officially launching our fifth model set, and our first Boeing airliner model—the Queen of the Skies, the 747-8i. The model is offered in two editions: Standard and Explorer. This file is for the Standard Edition.
Considering the model's size and detail, the Standard Edition is provided in three different scales: 1:100, 1:120, and 1:144. The finished model dimensions for each scale are shown in the table below.

In response to many requests, we have provided different printing files for the different scaled models, striving to make them as close to a single-piece print as possible. Please select the corresponding file based on your preference. The base file is universal for all scales.

1. Critical Printing Tips: "Prior preparation prevents poor prints."

 To ensure successful printing, please strictly follow these key requirements:
(1) For tall, slender parts like the fuselage and wings, it is essential to apply adhesive (recommended: Bambu Lab Liquid Glue) to the heated bed before printing. Also, appropriately increase the bed temperature based on the filament you are using.
(2) Use filament with good interlayer adhesion to ensure the strength of parts like the wings (especially the winglets). We recommend filaments with better layer bonding, such as PLA Basic or PLA+ (avoid filaments with poor interlayer adhesion like PLA Lite). Also, dry your filament before printing.

2. Custom Liveries

The model released this time features a blank fuselage without livery lines, making it convenient for you to create your favorite livery. We provide a complete DIY livery tutorial and templates. Please click here to view the tutorial. The templates can be downloaded from the document below.