这是我的新手打印作品，制作过程中有一些小调整和注意事项，跟大家说明一下：

1. 耗材选择：原计划使用黑色耗材打印，后续喷涂金色装饰；因黑色耗材缺货，临时更换为新到货的大理石纹白色耗材。
2. 打孔建议：由于我个人脸型偏大，这款产品不适合追求瘦脸效果的使用者，因此我未进行打孔处理。产品大部分佩戴位置适配性良好，大家可根据自身需求自行打孔。

3. 细节处理：眼部支撑部件拆卸后，建议进行打磨处理；打印完成后该部位存在少量毛刺，使用前请务必处理，避免影响佩戴体验。

    

This is my first 3D printing project. I’d like to share a few small adjustments and important notes about the production process with everyone: I'm from China and still a beginner. I'll try my best to upload some Chinese-style content. Feel free to leave a comment and exchange ideas!

1.Material Choice: I originally planned to print it with black filament and then add gold paint for decoration. However, black filament was out of stock, so I temporarily switched to the newly arrived white marble-patterned filament instead.

2.Drilling Recommendation: I have a relatively large face, so this product isn’t suitable for users looking for a face-slimming effect. For this reason, I didn’t pre-drill the holes. The product fits most wearing positions well, so you can drill the holes yourself according to your own needs.

3.Finishing Details: After removing the eye support part, it is recommended to sand it down. There are a few burrs on this part after printing, so be sure to remove them before use to avoid affecting the wearing experience.