Compact print-in-place garden tool mount

UPDATE: Now available as a parameterized OpenSCAD model that you can customize directly on MakerWorld!

The mount is parametric and can be customized for exactly the size you need.

I recommend using at least 3 wall loops and 25% gyroid infill for adequate strength and be careful when mounting the mount as too much screw force may split the layers.

The model from OpenSCAD works with the tolerance set to 0.2 mm on my X1C when printing with Bambu PLA. The latch requires a bit of force to loosen at 0.2 mm tolerance and the hinge can use a bit of exercise before running a bit more easy. The tolerance set to 0.3 mm results in significantly smoother latch movements and easier first release. I would recommend 0.3 mm tolerance and the latch might still require a little wack with something to loosen.

Other improvements on the new OpenSCAD model includes a strengthened hinge pin.

Assorted sizes print profiles

Naming and file structure

The files are structured with objects named as: 

<toolWidth>x<toolDepth>x<height>H-<screwDiameter>mm@<tolerance>mm

And plates named according to screw diameter. Each plate contains the same tool width and 6 variations of tool depth.

Printing on Bambu Handy

When printing directly from the Bambu Handy app, please make sure that you only print the variant that you want.

1. Select the plate by screw diameter.
   
2. Select the variant on the plate that you wish to print: