This bookmark was created using HueForge filament painting technique, which allows the image to appear through carefully timed filament color changes during printing.

For the best result, follow the recommended filament colors and layer changes below.

Recommended filaments (Bambu Lab PLA Basic):

• Base color – Bambu Lab PLA Basic Black
• Layer 6 – switch to Bambu Lab PLA Basic Pumpkin Orange
• Layer 17 – switch to Bambu Lab PLA Basic Jade White

The model is designed so the colors blend correctly through layer stacking, creating the final illustration.

You may replace the orange filament with another shade as long as the Transmission Distance (TD) is close to ~5.5, otherwise the color transitions may look different.

Print Profile

• Total thickness: 2.16 mm
• Layer height: 0.08 mm
• Initial layer height: 0.16 mm
• Walls: 1
• Infill: 100%
 

The model is designed to print easily and reliably on Bambu Lab printers.

Optional

A small hole is included so you can add a decorative tassel to transform it into a beautiful reading accessory or gift.

If you like this bookmark, check my profile for more HueForge bookmarks.

––––––––––––––––––

💼 Commercial Seller License available on Patreon:
patreon.com/SofieClaire
––––––––––––––––––