Hex Bin - parametric, hang, multi-connect — STL Grátis

Hex Basket organiser

I'm happy to share parametric Hex Basket organiser. Use provided print profiles or feel free to parametrise your own.

hex size and hex spacing - experiment to find the one you like most
width front and side
height is a compilation of two parameters - height front and height back. Thanks to this you can have a nice edge at the front. NOTE: if you will set big difference it might break model geometry. Reduce the difference OR increase solid edge height.
top flat surfaces - two parameters front top and back top surface. NOTE: to secure model geometry sum of front + top can override side width. See notes in the parametric file
stackable “lip” - this helps to stack baskets. Higher will give better stability.

hex size and hex spacing - IMPORTANT: keep this same as in the basket model
wall width - keep the same as main model
hook height, depth and back height - adjust to your project
connector distance between mounts - depends on basket size you want to hang together
tolerance - reduces he size of hex insert by selected factor. Depending on the printer, filament and your needs this might need to be adjusted. If the insert is too lose you can always glue it in.

hex size - there is a singe hexagon in the back, keep the same size as in main model
wall width - keep the same as main model
tag width and height - this will also adjust tag insert accordingly
tolerance - reduces he size of hex insert by selected factor. Depending on the printer, filament and your needs this might need to be adjusted. If the insert is too lose you can always glue it in.

Please let me know if you see need for any additional features. Also, happy to hear about any bugs. Enjoy!