A Simple single dice making mold to make
silicone casts for your resin dice making projects

Parts slide into eachother and can be secured with some tape or clamps if needed

usage Instructions. 

1. put some tape on the bottom of the mold (where the keys are)
2. Place the mold with the keys downward
3. stick your dicemaster(s) to the tape with some space in between them
4. mix and pour silicone in the mold
5. wait til it is cured
    
6. take the mold of the silicone and prep your mold with some mold release (storebought or vaseline etc)
7. put the mold back on with the keys facing up and ample space between your first silicone pour and the top of the mold.
8. pour second batch of silicone to make the lid.

9. after curing, take off the mold and clean edges.

    

   Now your mold is ready for use :D