This minimalistic lamp hanger is designed for clean ceiling installations while providing reliable built-in strain relief for your cable.

The model features:

• Integrated strain relief system
• Internal geometry that protects the wire insulation when tightening

A 4mm (M4) set screw is required to use the strain relief. The screw presses securely against the cable while the internal shape distributes pressure to reduce the risk of damaging the insulation.

Specifications

• Set screw: M4 (4mm)
• Mounting screw:
  • Max thread diameter: 4mm
  • Max head diameter: 7mm
• Max wire diameter: 6.5–7mm (depending on exact cable flexibility and fit)

Installation Notes

1. Mount the hanger to the ceiling using a screw within the specified dimensions.
2. Feed the cable through the hanger.
3. Insert and tighten the M4 set screw until the cable is firmly secured.
4. Do not overtighten — tighten only enough to prevent movement.

Ideal for DIY lighting projects, pendant lamps, and custom cable setups where a clean and simple mounting solution is needed.

!DISCLAIMER!

I have not tested the max load capacity of the hanger, so be careful if you are hanging heavy lamps