Get a solid grip when lifting your AMS 2 Pro with the AMS Flipper.

Lift handle designed to be used with the popular AMS Flipper, making it easier to raise and lower your AMS when accessing the top of your printer.

If you use an AMS Flipper, the AMS hinges upward to allow access for clearing stuck filament, maintenance, or servicing the printer. This handle provides a solid grip point so lifting and lowering the AMS is easier and more controlled.

Designed and tested on the AMS 2 Pro. 

Not currently compatible with standard AMS (in progress)

Both Left & Right Side handles available.

Compatible with both versions of the AMS 2 Pro.

One piece print in place design with no assembly required.

Features

• Designed for use with the AMS Flipper system
• Provides a comfortable grip for lifting the AMS 2 Pro
• Makes raising and lowering the AMS 2 Pro easier
• Clean design that matches the printer aesthetic

Installation

You can use:
• 1x AMS transport screw, or
• BT3x16 -AA110 (available from the Bambu Lab store)

If you purchased the AMS 2 Pro combo, it was originally secured to a transport bracket during shipping. One of those screws can be reused to secure this handle to the AMS 2 Pro.

Print Profiles

Two print profiles are included and tuned for different filament types:

• PLA profile – tuned for Bambu Lab PLA
• PLA CF profile – tuned for Bambu Lab PLA CF

Both Left & Right Side PLA handles available

(Bambu Lab PLA CF is recommended for strength and durability. It also produces a cleaner finish with minimal visible layer lines.)

Please do not modify the print settings, as the profiles are tuned for the print orientation and strength of the part. 

Changing them may lead to unexpected results.

The PLA profile is intentionally slowed down due to the print orientation so the part can print cleanly without requiring additional supports.