🇫🇷 Version française

Important :
Si vous utilisez un PLA différent de celui spécifié, les valeurs de distance de transmission peuvent varier et influencer le rendu final.

Projet : Bamboo Forest.hfp

Paramètres d’impression :

Remplissage : 100 %

Hauteur de couche : 0,08 mm

Première couche : 0,16 mm

Dimensions du modèle : 166,67 x 250 mm

8 filaments différents utilisés

Filaments et distances de transmission :

 The Model is 166.67x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #5eb932 PLA+ SUNLU GREEN  Transmission Distance: 2.8
    #515568 PLA ERYONE MATTE NAVY BLUE  Transmission Distance: 0.1
    #9b99a8 PLA ERYONE AGATE GREY  Transmission Distance: 1.8
    #b28e3d PLA WANHAO SKIN CARAMEL  Transmission Distance: 4.4
    #ffd491 PLA POLYTERRA PEANUT  Transmission Distance: 0.5
    #ffff05 PLA ERYONE YELLOW  Transmission Distance: 5.3
    #f5f4f2 PLA+ SUNLU CERAMIC  Transmission Distance: 1.5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to GREEN
    At layer #10 (0.88mm) swap to MATTE NAVY BLUE
    At layer #11 (0.96mm) swap to AGATE GREY
    At layer #12 (1.04mm) swap to SKIN CARAMEL
    At layer #13 (1.12mm) swap to PEANUT
    At layer #15 (1.28mm) swap to SKIN CARAMEL
    At layer #16 (1.36mm) swap to GREEN
    At layer #17 (1.44mm) swap to SKIN CARAMEL
    At layer #19 (1.6mm) swap to YELLOW
    At layer #22 (1.84mm) swap to CERAMIC for the rest.
 

🇬🇧 English Version

Important:
If you use a PLA different from the one specified, transmission distance values may vary and affect the final result.

Project: Bamboo Forest.hfp

Print Settings:

100% infill

Layer height: 0.08 mm

First layer height: 0.16 mm

Model size:  166.67 x 250 mm

8 unique filaments used

Filaments and Transmission Distances:

 The Model is 166.67x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #5eb932 PLA+ SUNLU GREEN  Transmission Distance: 2.8
    #515568 PLA ERYONE MATTE NAVY BLUE  Transmission Distance: 0.1
    #9b99a8 PLA ERYONE AGATE GREY  Transmission Distance: 1.8
    #b28e3d PLA WANHAO SKIN CARAMEL  Transmission Distance: 4.4
    #ffd491 PLA POLYTERRA PEANUT  Transmission Distance: 0.5
    #ffff05 PLA ERYONE YELLOW  Transmission Distance: 5.3
    #f5f4f2 PLA+ SUNLU CERAMIC  Transmission Distance: 1.5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to GREEN
    At layer #10 (0.88mm) swap to MATTE NAVY BLUE
    At layer #11 (0.96mm) swap to AGATE GREY
    At layer #12 (1.04mm) swap to SKIN CARAMEL
    At layer #13 (1.12mm) swap to PEANUT
    At layer #15 (1.28mm) swap to SKIN CARAMEL
    At layer #16 (1.36mm) swap to GREEN
    At layer #17 (1.44mm) swap to SKIN CARAMEL
    At layer #19 (1.6mm) swap to YELLOW
    At layer #22 (1.84mm) swap to CERAMIC for the rest.