Blastoise 2-piece Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

The Frame used in the picture can be found here: Modular Magnetic Frame System for Hueforge Art

The Frame is used in along with the Magnetic mount found here: Magnetic Wall Mount for Hueforge

Blastoise 2-piece Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mm

The Model is 200x400mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 3.56mm and the Actual Thickness is 2.68mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
    #9199a4 PLA Panchroma PLA Translucent Grey Transmission Distance: 6.8
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7
This print uses 4 unique filaments

***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Black
    At layer #4 (1.24mm) swap to Blue Gray
    At layer #11 (1.52mm) swap to Translucent Grey
    At layer #28 (2.2mm) swap to Jade White for the rest.

Check out my Anime

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Descrição