This is designed for following WINGSPAN's items;

・Bonus cards

・Egg tokens

・Dices

・Action tokens

・Feed tokens

・Purpose tiles

・オートマ cards

Parts Description

3 Large Structural Parts

• Bottom
• Top Outer Panel (has protrusions on the inner side walls)
• Top Inner Panel (has three protrusions on the side walls)

8 Additional Large Parts

• Rods ×6 (used to connect the large parts. The holes on the two ends of each rod are slightly different — one side has a step/ridge, the other does not.)
• Lid hinge parts ×2 (parts for the opening/closing mechanism)

Assembly Instructions

0. Print all parts.

1. Attach rods to the front two protrusions of the Top Inner Panel (4 connection points total).
At this time, use the hole with the step on the rod, and attach it so that the step remains visible. Hooking it in place helps with attachment.

2. Attach the other end of the rods from Step 1 to the protrusions on the Bottom  (4 connection points total).

3. Attach the lid hinge parts to the Top Outer Panel. This step may require a bit of force.

4. Attach rods to the protrusions on the Top Outer Panel from Step 3.
This time, use the side of the rod without the step, and attach it so the stepped side faces outward and remains visible.

5. Connect the protrusions from Step 4 to the remaining protrusions on the Top Inner Panel.

6. Attach the outer screws.
M3 × 20 screws seem to fit well.