I'm not sure what the big Dill is with a pickle that has arms and articulating legs, but now he is your dill. Set your dill pickle on your desk at the office, at home, or wherever you hang out. The opportunities are not that big of a Dill.

I printed with Bambu Labs mistletoe green, black, and Sunlu black PLA filaments. When using the mistletoe green I was able to purge into the model without the black showing through. If using a lighter green, I would suggest unchecking the purge filament in Bambu Studio under the ‘Other’ tab > ‘Purge into objects infill’. 

The 120% model is scaled proportionately. The 140% model is scaled to this on the X and Y axis, but set to 120% on the Z axis. You can change the Z axis if you would like. You might be able to scale up more, but I did not test this. If smaller than 120% scale the articulating legs might fuse together.

Only the .3mf file for both scaled models is available. Since I have a negative part in the model and when trying to export an .stl file, Bambu Studio is unable to perform a mesh Boolean and removes the color in the model.

If you want the single color only open Bambu Studio and remove all filaments but one under ‘Project Filaments’.

Important: Please make sure your filament is dry and the build plate is clean. This model was printed with my custom print settings under the .3mf file for optimal results at 120% scale and 140% scale.

Only the pickle was created by Makerworld image to 3d:

Powered by MakerWorld-Image to 3D Maker makerworld.com/en/makerlab/imageTo3d

Buy Me A Coffee

[https://buymeacoffee.com/foxmt406](https://buymeacoffee.com/foxmt406)