Levoit Core Mini Air Purifier - Intake Enclosure

Hey guys! First timer here. Just wanted to share my version of the popular Levoit Core Mini Intake Enclosure. We've got two cats and a dog here, so I wanted to ensure the air was clean and healthy for them, so I decided to buy an enclosure tent for my A1. I bought the YOOPAI 3D Printer enclosure which has a 70mm exhaust port on the side. And keeping compatibility in mind, I also bought the YOOPAI Fan Fume Extraction Kit which contained a retractable hose, a fan and a flange to attach the hose (both are linked below).

I wanted to split up the design in two, just in case there was any printing failures. So for anyone who is also a little afraid of printing large models only to waste filament due to some unforseen printing failure, you've come to the right place! Splitting up the model also meant that I had to design an interface that would allow me to snap the two halves together, so I designed four 20mm snap-on hooks for the top half that integrates seamlessly into the bottom half's grooves.

Support Filament: 21.21g

Model Filament: 381.00g

Total Filament: 402.21g 

Top Half Duration: 3hr 56min

Bottom Half Duration: 9hr 39min

Total Time: 13hr 35min

Bambu Studio Settings:

I didn't change too much in the settings, mainly adjusting the Supports and setting the Infill Pattern to Gyroid. I used Bambu PLA Basic filament only.

PRODUCTS USED:

Levoit Core Mini Air Purifier: [https://www.amazon.ca/LEVOIT-Purifiers-Freshener-Core-Mini/dp/B09GTRVJQM?th=1](https://www.amazon.ca/LEVOIT-Purifiers-Freshener-Core-Mini/dp/B09GTRVJQM?th=1)

Bambu Filament PLA Basic: [https://ca.store.bambulab.com/products/pla-basic-filament](https://ca.store.bambulab.com/products/pla-basic-filament)

YOOPAI 3D Printer Enclosure for Bambu Lab A1: [https://www.amazon.ca/dp/B0DJXX2H9M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1](https://www.amazon.ca/dp/B0DJXX2H9M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)

YOOPAI Fan Fume Extraction Kit for 3D Printer Enclosure: [https://www.amazon.ca/dp/B0DM1PHYDF?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.ca/dp/B0DM1PHYDF?ref=ppx_yo2ov_dt_b_fed_asin_title)

Camco 39553-X 3" Twist-It Clamp: [https://www.amazon.ca/dp/B003GC74S0?ref=ppx_yo2ov_dt_b_fed_asin_title](https://www.amazon.ca/dp/B003GC74S0?ref=ppx_yo2ov_dt_b_fed_asin_title)