Backlit Wolverine HueForge 

(B&W) A simple, easy-to-print Wolverine portrait. 

Optimized for a white-on-black filament swap to create a bold, comic-book aesthetic.

if you need a lightbox check put my Changeable Litho Hueforge light box frame 15x10cm

[https://makerworld.com/en/models/2161012-changeable-litho-hueforge-light-box-frame-15x10cm#profileId-2343002](https://makerworld.com/en/models/2161012-changeable-litho-hueforge-light-box-frame-15x10cm#profileId-2343002)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.14x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.19999mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 2 unique filaments

Swap Instructions:

Start with BambuLab Basic Black

At layer #8 (0.72mm) swap to BambuLab Basic Jade White for the rest.