Simple and strong stand for holding your laptop vertically or at an angle. 

This is strong, stable with a modern look.

Can be used also for Tablets.

PLEASE CHECK YOUR DEVICE THICKNESS and what ANGLE you want to hold your device before printing one of the stands.

If you like a different thickness and/or angle than the ones in the profile, you can use the customizing tool to generate your personal stand based on your needs. 

The profile contains 4 different premade sizes and angles:

- 15mm max device thickness and 15 degrees angle

- 20mm max device thickness and 15 degrees angle

- 15mm max device thickness and 40 degrees angle

- 20mm max device thickness and 40 degrees angle

Customizing the stand:

You can customize the device thickness and angle of the stand as following:

- device thickness from 10mm to 32mm

- angle of the stand from 15degrees to 40degrees. I've set a minimum of 15degrees in order to be more stable and safe.

While you increase the angle, the depth of the stand is also increasing slightly to ensure a stable position.