Elevate your desk or coffee table with these Magnetic Modular Hex Coasters. Designed for both style and utility, these coasters don't just protect your surfaces—they snap together to create satisfying geometric patterns, larger mats for pots, or a base for the HexSnap Snack System.

Key Features:

• Magnetic Interlocking: Each of the 6 side walls features a slot for a magnet. Thanks to the alternating polarity, they "snap" together perfectly.
• Embedded Magnets (Seamless Look): The magnets are hidden inside the walls for a clean, sleek finish.
• Optional Magnet Use: Don’t have magnets? No problem! These hexagons work perfectly as standalone coasters and still look great without the magnetic feature.
• Reversible & Versatile: The bottom is flat, so you can flip them over for a "flush" surface or use them as simple risers.

Technical Specifications & Assembly:

To make the magnetic feature work flawlessly, please follow these instructions:

• Magnet Size: Designed for circular magnets $6 \times 3$ mm.
• Magnet Orientation: To ensure every coaster is compatible with every other one, you must install the magnets in an alternating pattern: North - South - North - South - North - South.
• Automatic Pause: The provided Print Profile includes a pre-set pause at the exact layer where the magnets should be inserted.
  1. The printer will stop automatically.
  2. Drop the magnets into the slots (double-check the N-S-N-S polarity!).
  3. Resume the print to seal them inside.
• No Glue Needed: Since the magnets are embedded during the print, you don't need glue – the printer will cover them with the final layers.

Printer Settings:

• Material: PLA, PETG, or Marble-style filaments (perfect for that "stone" look).
• Infill: 15-20% (Gyroid recommended).
• Walls: 3 walls for structural integrity around the magnet pockets.
• Supports: None required!

How to Use:

1. Start the print using the provided profile.
2. When the printer pauses, place your 6x3 mm magnets in the holes (alternating N/S).
3. Resume print and watch the magnets get perfectly "trapped" inside.
4. Snap them together and enjoy your new modular setup!

Show off your prints! I’d love to see your color combinations and how you arrange your HexSnap set. Please share your photos in the comments!